[Tigers] Wiring Question

[Joe Brown]

Which ring terminal? The big one?

On Mon, Jun 17, 2019, 4:53 PM Will Seay <Tigers at embarqmail.com> wrote:

> Joe,
>
> The ring terminal is a chassis ground.  It shares a mounting bolt with the
> ignition ballast resistor mount.
>
> Will - 382001570
> Tigers at embarqmail.com
>
>
> On Mon, Jun 17, 2019 at 4:05 PM Joe Brown via Tigers <
> tigers at autox.team.net> wrote:
>
>> Hey,
>>
>> I'm hooking up a PowerGen alternator and my wiring harness has two ground
>> wires (actually three) that come out at the alternator.  One ring terminal
>> has a single wire and it fits on the ground terminal of the alternator.
>> The other ring terminal has two wires and a much larger ring terminal.  Any
>> idea where this is supposed to attach?
>> [image: image.png]
>>
>> FYI, I'm going to add additional wires to be able to carry the increased
>> current of the new alternator.
>>
>> Thanks,
>> Joe Brown
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190617/de001887/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 364230 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20190617/de001887/attachment-0001.png>