[Tigers] dipstick tube 260CID engine
D or G at sbc
orr4sale at sbcglobal.net
Thu Feb 27 18:22:42 MST 2020
Scott Drake has them but you can't purchase them directly from him, you have to go through one of his dealers (they are all over the US).
I find it strange that Rootes shows the Ford part number for the dip stick tube which has to be bent to work in a Tiger, but they don't show a Ford number for the long finger pull dip stick which is a regular Ford stick with the end bent to about 85 degrees, way easier to do than the tube.
David Franchi
On Thursday, February 27, 2020, 4:58:02 PM PST, Ron Fraser via Tigers <tigers at autox.team.net> wrote:
Darn I forgot to include
Most of the Mustang and Falcon catalogs should carry these parts.
I believe Scott Drake is making them.
Ron Fraser
From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Ron Fraser via Tigers
Sent: Thursday, February 27, 2020 7:51 PM
To: rick at atmospherebuilders.com
Cc: tigers at Autox.Team.Net
Subject: Re: [Tigers] dipstick tube 260CID engine
Here is some additional info
Tube – C2OZ-6754-A is listed by Ford at 15.83” long, for 260 and 289 engines with generator
I measured my tube at very near this length with about 14 ¾” above the timing cover to its end.
Dipstick - C30Z-6750-B
This is the Ford part number listed for 1964, 260 and 289 engines with generators.
22.48" shield to FULL
23.32" shield to ADD
24.44" shield to end
This is extremely close to the measurements I took on my dipstick.
Additionally: Width = .295” Thickness = .060”
Ron Fraser
From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Richard Hyatt via Tigers
Sent: Thursday, February 27, 2020 5:27 PM
To: tigers at autox.team.net
Subject: [Tigers] dipstick tube 260CID engine
When I got my engine back from a high performance machine shop, they happily pointed out the new chrome dipstick and dipstick tube they had obtained and installed in the process. Unfortunately this will not fit correctly as you can imagine. Mysteriously although they had returned some other parts, the dipstick was missing and the old tube battered to the point of no use. I am hoping to find a solution…….not sure if anyone has ever made a pattern of the original tube or has any ideas. Thanks.
Rick
_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/orr4sale@sbcglobal.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200228/dfa34d9b/attachment.htm>
More information about the Tigers
mailing list