[Tigers] Several items: door clips and door check rivet

[Joe Brown]

I bought the plastic sleeves but I gave up on them.

On Tue, Jun 23, 2020, 9:24 AM James Armstrong via Tigers <
tigers at autox.team.net> wrote:

> Hello,
>
> 1) In the Sunbeam Specialties catalog, page 20, there is a plastic sleeve
> numbered DP57S that is supposed        to  be used in conjunction with the
> door panel holding clips.They neither seem to fit over the holding clip
> nor      do they seat in the receiving hole. No help from SS on this one.
>
> 2) There is a rivet or bolt that holds the door-strap to the frame as a
> stop. This is not called out in the big                Alpine  parts
> list.nor does Rick carry them. What is this supposed to be. Some Brit sells
> a rivet kit with                washers and cotter pins on e-bay but is
> it correct? What is the correct part and what is its length and
>        diameter?
>
> Best regards to all,
>
> Jim Armstrong
> Mk 1A
> 382002083 LRXFE
> Code 86
> TAC #....
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200623/46f860b4/attachment.htm>