[Tigers] Several items: door clips and door check rivet

[James Armstrong]

In the end, I just don't know what Rick is selling here. Plus, I could get no information other than "they are toprevent the door clips from scratching the glass.  BUT they don't fit.
Jim A
In a message dated 6/23/2020 10:35:57 AM Eastern Standard Time, jbbrown1980 at gmail.com writes:

I bought the plastic sleeves but I gave up on them.
On Tue, Jun 23, 2020, 9:24 AM James Armstrong via Tigers <tigers at autox.team.net> wrote:
Hello,
1) In the Sunbeam Specialties catalog, page 20, there is a plastic sleeve numbered DP57S that is supposed        to  be used in conjunction with the door panel holding clips.They neither seem to fit over the holding clip nor      do they seat in the receiving hole. No help from SS on this one.
2) There is a rivet or bolt that holds the door-strap to the frame as a stop. This is not called out in the big                Alpine  parts list.nor does Rick carry them. What is this supposed to be. Some Brit sells a rivet kit with                washers and cotter pins on e-bay but is it correct? What is the correct part and what is its length and                   diameter?
Best regards to all,
Jim ArmstrongMk 1A382002083 LRXFECode 86TAC #...._______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200623/a60ed30a/attachment-0001.htm>