[Tigers] Several items: door clips and door check rivet

[James Armstrong]

Jim Damelio,
Those two pictures have, to mind, solved the dilemma. Over time the door clips have changed. I have a third type made of a cunningly bent single piece of wire that saved my bacon in the lowest fixing hole on the most forward point  of the door/panel. But none of the plastic cups worked with the SS door clips.
I give up, as someone else said. If it stays in place, close enough.
Thanks to everyone,
Jim Armstrong
In a message dated 6/23/2020 4:18:02 PM Eastern Standard Time, jimdamelio at verizon.net writes:

Attached are two pictures, one of the sleeve 9119622 and one of the original door panel clip 9131156.  Looks to me the original clip will fit in the original sleeve.
Jim D


Sent from my Samsung Galaxy smartphone.

-------- Original message --------From: James Armstrong via Tigers <tigers at autox.team.net>Date: 6/23/20 1:17 PM (GMT-05:00)To: jbbrown1980 at gmail.comCc: tigers at autox.team.netSubject: Re: [Tigers] Several items: door clips and door check rivet
In the end, I just don't know what Rick is selling here. Plus, I could get no information other than "they are toprevent the door clips from scratching the glass.  BUT they don't fit.
Jim A
In a message dated 6/23/2020 10:35:57 AM Eastern Standard Time, jbbrown1980 at gmail.com writes:

I bought the plastic sleeves but I gave up on them.
On Tue, Jun 23, 2020, 9:24 AM James Armstrong via Tigers <tigers at autox.team.net> wrote:
Hello,
1) In the Sunbeam Specialties catalog, page 20, there is a plastic sleeve numbered DP57S that is supposed        to  be used in conjunction with the door panel holding clips.They neither seem to fit over the holding clip nor      do they seat in the receiving hole. No help from SS on this one.
2) There is a rivet or bolt that holds the door-strap to the frame as a stop. This is not called out in the big                Alpine  parts list.nor does Rick carry them. What is this supposed to be. Some Brit sells a rivet kit with                washers and cotter pins on e-bay but is it correct? What is the correct part and what is its length and                   diameter?
Best regards to all,
Jim ArmstrongMk 1A382002083 LRXFECode 86TAC #...._______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200624/b0562b1c/attachment.htm>