[Tigers] Several items: door clips and door check rivet

[Ron Fraser]

Jim

                

1                     I don’t have any of those plastic sleeves on my doors – may be I need them so the clips hold better

Anyone with the plastic sleeves – please measure the diameter of the holes they use in the door.

There could be a style difference here we need to understand.

 

2                     the rivet could be the same as on the Series I & II

Body fittings – listed under part B70 – H.116241 Rivet – superseded by 2212324

 

I do not have any of these parts or I would send a picture.

Someone must have an untouched Alpine or Tiger out there to take a picture.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of James Armstrong via Tigers
Sent: Tuesday, June 23, 2020 10:18 AM
To: tigers at autox.team.net
Subject: [Tigers] Several items: door clips and door check rivet

 

Hello,

 

1) In the Sunbeam Specialties catalog, page 20, there is a plastic sleeve numbered DP57S that is supposed        to  be used in conjunction with the door panel holding clips.They neither seem to fit over the holding clip nor      do they seat in the receiving hole. No help from SS on this one.

 

2) There is a rivet or bolt that holds the door-strap to the frame as a stop. This is not called out in the big                Alpine  parts list.nor does Rick carry them. What is this supposed to be. Some Brit sells a rivet kit with                washers and cotter pins on e-bay but is it correct? What is the correct part and what is its length and                   diameter?

 

Best regards to all,

 

Jim Armstrong

Mk 1A

382002083 LRXFE

Code 86

TAC #....

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200624/088a3dba/attachment.htm>