[TR] Wire terminations

[Keith Richard Stewart]

I typically crimp them and apply a bit of solder as well. I use the bullet crimping tool from British Wire and also their crimping tool for spade connectors

http://www.britishwiring.com/Ratcheting-Crimping-Tool-for-Terminals-p/pr4.htm

 

Keith Stewart

 

From: David Friedlander <forzion7 at gmail.com> 
Sent: January 7, 2019 2:23 PM
To: New England Triumphs <net at newenglandtriumphs.org>; TR3 Triumphs <triumphs at autox.team.net>
Subject: [TR] Wire terminations

 

Hey all ~

 

Hope everyone enjoyed their holidays and were able to 

spend some quality time with loved ones....

 

I've got a new wire harness for my TR3 in hand and was 

wondering your thoughts for those wires not using bullet 

connectors, (I'll likely use the bullet crimping tool from 

British Wire for that). So, for wires requiring spades, rings, 

etc. do you suggest soldering these terminals or is crimping 

a better choice? If crimping, what tool have others found to 

be reliable?


Thanks !!

 

Dave Friedlander

'74 TR6

'59 TR3A

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190108/1a335048/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 06PowerRing.jpg
Type: image/jpeg
Size: 370489 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190108/1a335048/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11GroundRing.jpg
Type: image/jpeg
Size: 354572 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190108/1a335048/attachment-0001.jpg>