[TR] FW: TR6

[dave northrup]

Thank you so much!!!


-------- Original message --------
From: Roger Elliott <elliottr at rmi.net>
Date: 4/10/22 3:39 PM (GMT-06:00)
To: triumphs at autox.team.net
Subject: Re: [TR] FW: TR6


>From Kastner's Triumph preparation handbook
"I had complained to Stromberg about fuel flooding on hard cornering and fuel starvation problems in others.  Their advice was that I should try different locations with the float chamber vent. Their recommendation was to 'try the vents forward and rear diagonally, if this didn't help to try two forward then try two rearward.' Moving the float chamber vent did fix the problem"

Roger

On 4/10/2022 1:58 PM, dave northrup wrote:
FYI – this is the answer to my question.  Does it at all fuel tank levels.  Tank is original as far as I know.

From: Richard Good <goodparts at verizon.net><mailto:goodparts at verizon.net>
Sent: Sunday, April 10, 2022 12:25 PM
To: dave northrup <dave at ranteer.com><mailto:dave at ranteer.com>
Subject: RE: TR6


That is the classic Stromberg left turn cut-out.  I think it has to do with slosh in the carb float bowls.  I tried lots of things but never entirely got rid of it.  I never could figure out if it was starving or flooding.

Richard

Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com

________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220410/da02658c/attachment.htm>