[TR] Shipping drive shafts

[Sujit Roy]

Hi Glenn,
It is the half shafts from a TR6. I found a local chap who can rebuild
them. I want them for my Stag, I have stake shafts. The part no. are shared
between the two Triumphs.
I actually only need part no. UKC643. This part can use replaceable UJ's.
The hubs don't fit in a flat rate box flat.

Sujit

On Fri, Apr 29, 2022 at 2:26 PM <stagbytriumph at triumphstagclub.org> wrote:

> Sujit,
>
>
>
> I didn’t think you might be thinking prop drive shafts and not axle half
>  shafts?
>
>
>
> If in the event you are thinking prop drive shaft, it is not worth
> shipping vs a driveshaft service & manufacturing shop.
>
>
>
> For a prop shaft all you need are the complete flange ends that are welded
> into the tube  ask the seller to Sawzall .  A good driveshaft shop will
> select a correct length of steel tube, weld on the ends, balance and
> rebuild the universal joints for less cost than shipping from Florida.
>
>
>
> Half shaft axles, shipping those is different as I noted in my previous
> email.  So is it axles or prop drive shafts?
>
>
>
> StagByTriumph
>
>
>
> *From:* Triumphs <triumphs-bounces at autox.team.net> *On Behalf Of *Sujit
> Roy
> *Sent:* Friday, April 29, 2022 10:52 AM
> *To:* Triumphs <triumphs at autox.team.net>
> *Subject:* [TR] Shipping drive shafts
>
>
>
> I need a pair of  drive shafts for a TR6 shipped from FL to CA.
>
> They are heavy and won't fit in a flat rate box.
>
> What is the best and cheapest way to ship them?
>
>
>
> Sujit
>
>
>
>
> --
>
> Sujit Roy
> Cupertino, California
>
>
> https://triumphstagblog.wordpress.com/
>


-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220429/223cb6ec/attachment.htm>