[TR] TR] Rocker Shaft locating screw (aribert neumann)

[johnnybh]

Hello,

An 11/64 drill bit is 0.17185" in decimal, which is approximately the 
tap drill size (0.1770") for #12-24 thread.

In this day and age I would also be tempted to try a metric screw. A 
M5x1.0 would be closest.

oldjohnny

> -------- Original message --------
> From: Roger Elliott<elliottr at rmi.net>
> To:triumphs at autox.team.net
> Cc:
> Bcc:
> Date: Sun, 27 Apr 2025 18:20:35 -0500
> Subject: [TR] Rocker Shaft locating screw
> Anyone know what size the rocker shaft locating screw is? I just
> received a rocker shaft that the screw will not go into.  Checked with
> drill bits.  An 11/64 drill bit would go into old rocker shafts easily,
> but not into the new one.
>
> Shouldn't make any difference, but this is for a GT6 mark 1.
>
> Thanks,
> Roger Elliott
> ****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20250430/56f9cb76/attachment.htm>