[TR] TR] Rocker Shaft locating screw (aribert neumann)

[DAVID MASSEY]

12-24 screws are available at McMaster-Carr.  But you gotta buy 50 of them.
Dave 


 

    On Wednesday, April 30, 2025 at 02:44:52 PM CDT, johnnybh <johnnybh at windstream.net> wrote:   

   

 
 
Hello,
 
An 11/64 drill bit is 0.17185" in decimal, which is approximately the tap drill size (0.1770") for #12-24 thread.
 
In this day and age I would also be tempted to try a metric screw. A M5x1.0 would be closest.
 
oldjohnny
 
 -------- Original message --------
From: Roger Elliott <elliottr at rmi.net>
To: triumphs at autox.team.net
Cc:
Bcc:
Date: Sun, 27 Apr 2025 18:20:35 -0500
Subject: [TR] Rocker Shaft locating screw
Anyone know what size the rocker shaft locating screw is? I just
received a rocker shaft that the screw will not go into.  Checked with
drill bits.  An 11/64 drill bit would go into old rocker shafts easily,
but not into the new one.

Shouldn't make any difference, but this is for a GT6 mark 1.

Thanks,
Roger Elliott
****************************************
 
 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20250501/6f33aa86/attachment.htm>