[TR] TO Bearing

[Greg Lemon]

David, after reading a bunch of stuff when I did my car nearly 15 years ago
I decided the known good on my car was as good as any.  Car had about
85,000 miles at the time, so no idea if it was factory original, but still
going strong 20,000 miles later.

Greg Lemon
TR250

On Sun, Sep 7, 2025, 9:13 AM David Friedlander <forzion7 at gmail.com> wrote:

> This could well be the most frequently asked TR6 question but, after
> reading many articles ( including the Buckeye Triumph website) and posts,
> is there any consensus among listers as the most viable release bearing to
> use on the TR6 clutch? Making the question a bit more difficult, I should
> ask about bearings that are STILL AVAILABLE.
>
> Thanks as always,
>
> Dave
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20250907/78421168/attachment.htm>