[TR] TO Bearing

[Sujit Roy]

I have a Stag with a borg and beck clutch. The incorrect bearing can make
thr clutch heavy. I was able to source an RHP bearing out of uk. The
bearing is shared with other Triumphs.

I periodically make videos on YouTube.  I made one on the release bearing
https://youtu.be/qDGozr8hpEE?si=XbK3aDHheLugQEGj


Sujit.

Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/


On Sun, Sep 7, 2025, 2:02 PM Greg Lemon <grglmn at gmail.com> wrote:

> David, after reading a bunch of stuff when I did my car nearly 15 years
> ago I decided the known good on my car was as good as any.  Car had about
> 85,000 miles at the time, so no idea if it was factory original, but still
> going strong 20,000 miles later.
>
> Greg Lemon
> TR250
>
> On Sun, Sep 7, 2025, 9:13 AM David Friedlander <forzion7 at gmail.com> wrote:
>
>> This could well be the most frequently asked TR6 question but, after
>> reading many articles ( including the Buckeye Triumph website) and posts,
>> is there any consensus among listers as the most viable release bearing to
>> use on the TR6 clutch? Making the question a bit more difficult, I should
>> ask about bearings that are STILL AVAILABLE.
>>
>> Thanks as always,
>>
>> Dave
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com
>>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20250907/5a6ca627/attachment.htm>