[Zmagnette] Machinist projects
Mike
mikesmuseum at yahoo.com
Mon Dec 16 16:47:17 MST 2013
The oil fill on the axle? Get a 7/16" piece of bar stock, put a 90° bend in it, and cut off one leg to be an inch and a half or so long. Instant filler/drain plug tool.
Mike
________________________________
From: John Park <jpark at bmts.com>
To: 'List for the Z Magnette Group - North America' <zmagnette at autox.team.net>
Sent: Monday, December 16, 2013 3:39 PM
Subject: Re: [Zmagnette] Machinist projects
There’s a fellow in Michigan who goes to John Twist’s summer parties who sells the illusive differential oil fill plug wrench. Nortier, maybe Rob? MaybeJjohn could enlighten us on that. I bought one from him about 10 years ago. Works like a charm.
From:zmagnette-bounces at autox.team.net [mailto:zmagnette-bounces at autox.team.net] On Behalf Of Allen Bachelder
Sent: Monday, December 16, 2013 5:23 PM
To: List for the Z Magnette Group - North America
Subject: Re: [Zmagnette] Machinist projects
Thanks Lann! We have a community college in town - I'll start with them. And thanks also for the Sherline link.
Holiday Cheers,
Allen
****************************************************************
Allen & Florrie Bachelder =iii=<
Spring Creek Home for Wayward MGs
'57 ZB, '65 B, '69 C/GT, '73 B/GT
North Street, MI 48049, USA
http://www.mgexperience.net/member/bachldrs
****************************************************************
On Dec 16, 2013, at 2:31 PM, LannM at aol.com wrote:
Alan, et al,
>
>Here in NE Oklahoma the Technology Center offers one or two night a week classes in auto body, painting, upholstery, all kinds of welding, CAD, NC programming and machining. The cost is reasonable and geezers (60+) get a 20% discount. There may be something similar in your area.
>
>And, for a good introduction to machining check www.sherline.com. Their stuff is small, but they are real tools. Everything you can learn on a Sherline lathe or mill transfers to full size machines.
>
>Lann
>
>In a message dated 12/15/2013 7:45:51 P.M. Central Standard Time, bachldrs at comcast.net writes:
>#2 SteveK: I agree - what a terrific idea. And boy - what I'd give for a couple old geezer's machining classes. Anybody know where I can take one or two or whatever it takes?
>>
>>Steve T: I have another idea for a project - a serpentine crankshaft pulley for a five-main MGB engine, along with a matching pulley for the water pump, would be on the top of my wishlist. Preferably, make the crankshaft pulley in the form of a harmonic balancer, but beggars cannot be choosers...
>>
>>Steve K, you will need that octagonal socket when you get to working on your Magnette rear axle. Unlike you, I totally forgot I already had one of these and was looking for a hex wrench to do the trick. ' Bet I spent over a week looking for one before I realized even the right size wouldn't fit, AND that I already HAD ONE!!
>>
>>If I get any more ideas, I'll share them!
>>
>>Thanks,
>>Allen
>>****************************************************************
>>Allen & Florrie Bachelder =iii=<
>>Spring Creek Home for Wayward MGs
>>'57 ZB, '65 B, '69 C/GT, '73 B/GT
>>North Street, MI 48049, USA
>>http://www.mgexperience.net/member/bachldrs
>>****************************************************************
>>
>>On Dec 15, 2013, at 3:32 PM, Steve Kirby wrote:
>>
>>
>>
>>Wow, that's great in the first place, that he is pursuing this wonderful trade. Congratulations to you, and to your son.
>>>
>>>Such an awesome offer. I purchased, at great expense, that socket you are talking about. Never used it. If he could use it for guidance, I'd be glad to loan it to him.
>>>
>>>As to other ideas, I have none to offer at the moment, but as soon as your son gets booked up, I know I'll think of something.
>>>
>>>Thanks for thinking up a great offer, though!
>>>
>>>#2Steve K
>>>----- Original Message -----
>>>>From: Steven Trovato
>>>>To: List for the Z Magnette Group - North America
>>>>Sent: Saturday, December 14, 2013 6:55 PM
>>>>Subject: [Zmagnette] Machinist projects
>>>>
>>>>My son is in college in a two year program to become a machinist. It
>>>>seems that he needs some proposals for projects he can do there. As
>>>>the one paying the tuition, I get to suggest something that would be
>>>>of use to me and my MGs. One thought I had was to make a nice socket
>>>>for the octagon shaped rear axle nut. Does anyone else have any
>>>>ideas for any cool stuff I could suggest? There's no guarantee that
>>>>he will do it, as the project would have to fit in with the goals of
>>>>the course work. So, what would you guys do if you had a machinist
>>>>at your disposal? Note that this is not an automotive machinist
>>>>program, so they are not set up for operations on engine blocks,
>>>>crankshafts, etc.
>>>>
>>>>-Steve T.
>>>>
>>>>_______________________________________________
>>>>Zmagnette mailing list
>>>>
>>>>Donate: http://www.team.net/donate.html
>>>>Archive: http://www.team.net/archive
>>>>Forums: http://www.team.net/forums
>>>>Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/skirby210@cox.net
>>>_______________________________________________
>>>Zmagnette mailing list
>>>
>>>Donate: http://www.team.net/donate.html
>>>Archive: http://www.team.net/archive
>>>Forums: http://www.team.net/forums
>>>Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/bachldrs@comcast.net
>>
>>=
>>
>>_______________________________________________
>>Zmagnette mailing list
>>
>>Donate: http://www.team.net/donate.html
>>Archive: http://www.team.net/archive
>>Forums: http://www.team.net/forums
>>Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/lannm@aol.com
>_______________________________________________
>Zmagnette mailing list
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/bachldrs@comcast.net
_______________________________________________
Zmagnette mailing list
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/mikesmuseum@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20131216/9515a910/attachment-0001.html>
More information about the Zmagnette
mailing list