[Zmagnette] H2 leakng at float bowl junction
Steve Hanegan
steve at betterwitnesses.com
Fri Apr 4 11:34:06 MDT 2014
I found that the mixture of Ethanol/MTBE laden gas and plain rubber grommets was an issue on mine. I got some new grommets from Joe Curto (http://joecurto.com/) that are made out of Viton and that seemed to do the trick.
Steve H.
On Apr 4, 2014, at 10:31 AM, Rodger Shaver <gopherdad at aol.com> wrote:
> I installed rebuilt H2 SU carbs and they are both leaking at the bolt that holds the float bowls to the base of the carb. How is this best fixed? Rodger
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140404/3d308de6/attachment.html>
More information about the Zmagnette
mailing list