[Zmagnette] H2 leakng at float bowl junction

[Rodger Shaver]

Any opinions on the banjo bolt versus stud -type set up, vis a vis leaking?  I I am ordering some Viton grommets, the new ones I had put on are black and rubber-like.  What do the Vitons look like? 


-----Original Message-----
From: Steve Hanegan <steve at betterwitnesses.com>
To: List for the Z Magnette Group - North America <zmagnette at autox.team.net>
Sent: Fri, Apr 4, 2014 11:34 am
Subject: Re: [Zmagnette] H2 leakng at float bowl junction


I found that the mixture of Ethanol/MTBE laden gas and plain rubber grommets was an issue on mine. I got some new grommets from Joe Curto (http://joecurto.com/) that are made out of Viton and that seemed to do the trick.


Steve H.


On Apr 4, 2014, at 10:31 AM, Rodger Shaver <gopherdad at aol.com> wrote:


I installed rebuilt H2 SU carbs and they are both leaking at the bolt that holds the float bowls to the base of the carb.  How is this best fixed? Rodger
_______________________________________________
Zmagnette mailing list

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com






_______________________________________________
Zmagnette mailing list

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/gopherdad@aol.com


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140405/abe94e2b/attachment.html>