[Zmagnette] H2 leakng at float bowl junction
Steve
skirby210 at cox.net
Sat Apr 5 21:06:41 MDT 2014
guess I misread the question. I thought his float bowl was leaking. My
bad. Sorry.
-----Original Message-----
From: Steven Trovato
Sent: Saturday, April 05, 2014 5:07 PM
To: List for the Z Magnette Group - North America ; List for the Z Magnette
Group - North America
Subject: Re: [Zmagnette] H2 leakng at float bowl junction
Steve K,
An SU carb can have a stud or a bolt holding the bowl to the
body. Based on Roger's comments, it seems he has the bolt. These
have just two rubber seals, one on top and one on the bottom of the
bowl arm. If you have the stud version, then there is a sandwich of
three washers on the bottom. Is this what you are referring to? I
don't know what other thin gaskets you mean.
-Steve T.
At 03:33 PM 4/4/2014, Steve wrote:
>in addition to what SteveH said, I trust you do have those thin gaskets in
>place? And, it is very easy for those thin little buggers to not seat
>properly when you tighten them down.
>
>#2SteveK
_______________________________________________
Zmagnette mailing list
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/zmagnette/skirby210@cox.net
More information about the Zmagnette
mailing list