[Zmagnette] Fuel pump
Steven Trovato
strovato at optonline.net
Tue Mar 18 20:44:47 MDT 2014
Fletcher,
I found this
source: http://autoperformanceengineering.com/html/bel_pump.html,
but unfortunately almost everything is listed as unavailable. There
is just one bellows kit that seems to be still available. I guess
that is good enough if that's the one you need!
-Steve T.
At 08:39 PM 3/18/2014, Fletcher Millmore wrote:
>Common aftermarket pump. Those pumps were sold under many names,
>incl AC and Autopulse. They came in 6V, 12V and 24V, high and low
>pressure. Not ground sensitive, and I think there should be markings
>for voltage. Originally had brass bellows, later replaced by rubber
>bellows. Until very recently and maybe still, the rubber bellows
>were still available, and usually that is the only part you need.
>Since the bellows were produced long after the ethanol additions
>started, I imagine that later ones would resist ethanol; no other
>parts are sensitive. Service repair kits used to include bellows,
>points, gaskets, and you could get either of two springs - which
>determine the output pressure.
>
>FRM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140318/799396d5/attachment.html>
More information about the Zmagnette
mailing list