[Zmagnette] Oil pipe

[jeffmgcar at aol.com]

I go to a speed shop or a hot rod shop and I had them build me a s/s braided hose with the proper fittings on both ends. Not the cheapest but will not blow up. A solid copper line could be used but it would have to have a coil between the engine and the bulk head to allow for flex.

Jeff Becker
 
 
-----Original Message-----
From: webuck1 <webuck1 at cox.net>
To: zmagnette <zmagnette at autox.team.net>
Sent: Sun, May 11, 2014 7:59 pm
Subject: [Zmagnette] Oil pipe


I am almost done with my engine rebuild. My Z has that plastic pipe (brittle and 
broken) for the oil line to gauge. I want to put the copper or metal pipe in. 
One from an MGA was given to me. What do I need to do to connect this all up. I 
believe I need the flex hose and connector as in the MGA but I am not sure of 
the fittings on each end. Will I need any adapters on either or both ends? Any 
and all help is always appreciated. Thank you in advance.
Buckey in AZ
_______________________________________________
Zmagnette mailing list

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/jeffmgcar@aol.com


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140511/8113c511/attachment.html>