[Zmagnette] Manifold

[John Perkins]

Mike:
     I started with the manifold from Pierce, but replaced with a sheet 
metal intake Sean Brown made for me.  The Pierce manifold runners are 
too long to allow Air cleaners on the SU HS6 carbs I'm using.  Sean made 
up a shorter manifold for me.
     I used a Hi-Gear kit for a T-9 in my Magnette.
         Perkins

On 5/28/2014 3:24 PM, Mike Coe wrote:
> Hi: I'm trying to access an *"intake manifold for the aluminum cross 
> flow head"*. This for the 1950 cc MGB engine going into my Magnette. 
> Any ideas ?
> I also have and will be installing a Celica 5 speed. For which I'll 
> need a bell housing. This apparently available from Australia; Unless 
> one is elsewhere locatable ?
> Cheers
> Mike -- Calgary
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/zmagnette/zamagnette@charter.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140528/0d216d64/attachment.html>