[Zmagnette] Seat slides
mgmike62 at gmail.com
Mon Sep 1 10:34:29 MDT 2014
Thanks, the non-adjuster slides work fine and these are tight and not installed but just sitting on the bench, should I expect them to loosen up upon installation on the seats and in the car?
Sent from my iPhone
> On Sep 1, 2014, at 12:12 PM, Steve Hanegan <steve at betterwitnesses.com> wrote:
> No, this is not normal, and I assure you that the car did not leave the factory or the dealership in this condition - and there is no need to "start filing" (just makes things worse!). I would start by loosening all fasteners that hold the seat tracks to the seat frame and the tracks to the car body, then, move the seat fully back and forward to allow the bits to self align, then re-tighten the fasteners. There should be some resistance, but the seat should be easily adjustable throughout its' range. Make sure that there is some lubricant on the tracks as well.
> Steve H.
>> On Sep 1, 2014, at 9:05 AM, Mgmike62 at gmail.com <mgmike62 at gmail.com> wrote:
>> The seat slides with the adjusters are very tight, is this normal or do I start filing?
>> Sent from my iPhone
>> Zmagnette mailing list
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://firstname.lastname@example.org
> Zmagnette mailing list
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://email@example.com
More information about the Zmagnette