>>>> I looked at the wiring diagrams in my shop manual; if I'm
>>>> reading them correctly, there is no provision for either a
>>>> ballast resistor or its associated bypass wire. My car
>>>> has the white wire connected directly to the coil (no
>>>> ballast resistor)...it sounds like your distributor might
>>>> have been the real problem anyway.
>>
>>>> Kevin Meek (kevnmeek(at)netcom.com) Sunbeam Tiger B382002202
>>
>>***** NOTES from Jay Laifman (JLAIFMAN (at) PNM) at 11/7/95 8:58a
>>I can definitely vouch for the existence of the wire in my very late
>>Series V exactly as described by Armand (color, clips and extra covering),
>>and the lack of the wire in any book or wiring diagram I have. I removed
>>the resistor now that I have an electronic ignition. But, Kevin's
>>previous description seems correct for the stock connection.
>>
>>Jay Laifman
>
>
>So Jay, does the wire on your series v go to the coil? Or does it just
>hang there like mine.??
>
>
>
> ARMAND RITCHIE
> B395014212
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:18:19 CDT