> I am having a problem with my master/slave cylinder in my '62 ser II
> I have to pump up the cluch to accumulate enough presure in the slave to
> fully release the release bearing however in doing so the slave piston over
> extends and leaks fluid .
> It seems that the mechanism in the master is not providing enough pressure
> and is also not travelling smoothly and easily enough.
I had a similar problem with my SI. I rebuilt the slave, kept
trying to bleed it, etc. I finally bought a new master cylinder
from Rick and that cured my problem - you should probably take
a look at your master first, you might be able to just rebuild
it (which would certainly be cheaper!)
............................................................
Kevin Meek (kevnmeek(at)netcom.com) Sunbeam Tiger B382002202
Santa Cruz, California Sunbeam Alpine SI B9011324
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:18:44 CDT