Eric--Don't waste your time rebuilding or replacing one without
rebuilding or replacing the other. Usually they are the same vintage; if
one goes out the other is soon to follow. Holler if you want some tips
or imfo on this.
The Happy Mechanic--Chris
On Sun, 3 Dec 1995 EJMW(at)aol.com wrote:
> I am having a problem with my master/slave cylinder in my '62 ser II
> I have to pump up the cluch to accumulate enough presure in the slave to
> fully release the release bearing however in doing so the slave piston over
> extends and leaks fluid .
> It seems that the mechanism in the master is not providing enough pressure
> and is also not travelling smoothly and easily enough.
>
> Any suggestions?
>
> thanx
>
> Eric
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:18:45 CDT