On Mon, Mar 4, 1996 Bert Clewits wrote:
>Does anyone have the Timken or SKF bearing numbers of the >rear wheels and
front wheels, as I hear a noise coming from >the rear wheel bearing.
I just replaced the front wheel bearing on our series V. The numbers from
the removed bearings are as follows:
Inner Bearing - SKF, part # AK-1988
Outer Bearing - Timken, part # LM11949
The races have different numbers (this seems strange to me because I though
they came as a set)
Inner Race - SKF, part # K1922
Outer Race - Timken, part # LM11910
As long as you've got it apart, don't forget to replace the grease seals.
The number on the old seal is RTB 3867, mfg. unknown. Sorry I don't have
the numbers for the new parts. I ordered the parts from a supply house, I
told them I needed the stuff for a Series V Alpine and they figured out the
correct numbers. The bearings they sent me were FAG for the inner and MOUGEL
(sp?) for the outer. I didn't write down those numbers before I installed
them.
As far as rear bearings go, I dunno. The SAOC members hand-book lists a part
number of QH QWB 142C for the series V. The manufacturer is not listed.
I hope some of this helped.
Terry Edlund
San Diego, CA
B395009965
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:20:54 CDT