Brian wrote:
"A couple of possibilities come to mind: 1) The springs
are not turned so that their ends are sitting in the reliefs
in the upper and lower spring pans"
I don't recall any positioning on the bottom a-arms, I will look
tonight. But, I think that there is a good possibility that the spring is
not completely inside of the groove cut out for the spring in the rubber
isolater on top. I really did not thing that the CAT version was thicker
than the stock ones when I put them side to side. But, I can see how the
groove may be a tight fit. I hear that there is a Ford rubber isolater
that will fit and is thinner than stock.
- --- I just spoke with Rick at Sunbeam Specialties. He confirmed that
he has heard that the CAT version will raise the car slightly. So there
you have it. I think that every time I have tried to buy something from
other than Sunbeam Specialties, I have not been happy.
Jay
Jay S. Laifman
Pircher, Nichols & Meeks
1999 Avenue of the Stars
Los Angeles, California 90067
(310) 201-8915
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:22:52 CDT