Front Spring Insulator

From: Steve Wickland x3128 (wickland(at)eng.adaptec.com)
Date: Thu May 16 1996 - 20:02:04 CDT

> 1. get the Sunbeam Specialties rubber which is the right size
> (but which will soften the front end by loosening the springs),

I bought the Front Spring Insulator from SS and found it was too
soft! They managed to work their way out of position so far that I
could see it hanging from the side of the spring after a few
hundred miles. It was still traped by the side of the spring but
doing nothing. If you want mine you can you can have them.

Steve W.

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:23:00 CDT