i think I still have a couple of sets of good used spring rubbers in my
boxes. Actually, I have only seen one go bad in all of the Sunbeams
I've worked on over theyears.
Regard-Chris
On Thu, 16 May 1996, Steve Wickland x3128 wrote:
>
> > 1. get the Sunbeam Specialties rubber which is the right size
> > (but which will soften the front end by loosening the springs),
>
> I bought the Front Spring Insulator from SS and found it was too
> soft! They managed to work their way out of position so far that I
> could see it hanging from the side of the spring after a few
> hundred miles. It was still traped by the side of the spring but
> doing nothing. If you want mine you can you can have them.
>
> Steve W.
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:23:00 CDT