Does anyone of you know which size clutch main cilinder belongs to the Alpine series IV, is it the 15.9 mm or the 19.0 mm ?
I've got one which is 15.9 mm I have rebuild that one and the slave cilinder and the clutch still doesn't work. I have used the new piston which came with slave cilinders repair kit from the master I only replaced the seals. I made sure that all seals are placed correctly and I have some pedal pressure and piston travel but not a lot ! I bleeded the system several times and there are no leaks. After putting some extra rings below the slave cilinder I just got it working Also the main cilinders piston pin is mounted on the most outer hole of the pedal. Is it that there isn't enough oil displacement or could there be something wrong with the release bearing or clutch plate or cover ?
Any help is greatly appreciated
Bert