Can someone help me with measurements for an alpine/tiger rearend. I am
getting ready to have my 8.8"/9" rear built for my SII. Hopefully someone
has a rearend out of a car and can accurately measure these for me. If
anyone can give me some or all of the following measurements it would be
appreciated:
1. Housing width (end of tube to end of tube)
|-[===={}====]-|
<-----here----->
2. Overall width (flat surface of brakes)
|-[===={}====]-|
<-------here------->
3. The width between the leafspring mounting pads/pins.
4. The width, backset, and/or offset of a stock wheel
thanks in advance
jim bixby
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:30:22 CDT