The hard part is Putting the Smoke back in the wires..... 8-)
Rich
>----------
>From: Tom Yang[SMTP:73742.1362(at)compuserve.com]
>Sent: Monday, December 02, 1996 2:24 PM
>To: (unknown)
>Subject: Re: I smelled smoke!
>
>O.K., So it's not going to be as simple as replacing a fuse, but where do I
>start?
>
>I don't have the shop manual in front of me, but the circut comes from the
>flasher hot, and the turn-signal switch sends it to the respective turn
>signal,
>where it makes ground through the light housing screws. Is this right? That
>would explain why my turn signals were flashing without turning the lever
>when
>my problem first occured. The current was grounding out before the switch.
>
>I guess the place to start would be see if there is current at the flasher,
>which is located on the left inner fender?
>
>Thanks for the help in Lucas engineering!
>
>Tom
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:30:23 CDT