Chris S. Mottram/AMPAC/ECCI wrote:
>
> On a series 5, is the firewall throttle linkage bracket attached using
> gromets or just with nuts bolts and washers. Mine has pulled loose and
> there appears to be some remanants of a gromet but it may have been a DPO
> mod. If there is a gromet, should there be a little play or wiggle in
> the bracket?
>
> Thanks,
> Chris
Chris,
On my series 5 the throttle linkage is held by grommets. On the bracket which attaches to
the carb, the linkage goes though the grommet and is captured by a washer and cotter pin.
On the firewall side there is only a grommet.
-Roger Gibbs
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:32:32 CDT