Karl and Srgio wrote,
.................> I would like to get my hands on a cast iron head if
it
will bolt on.............
>Sergio- I think you will find that it won't as the inlet and exhaust
>ports are arranged differently in the iron head compared with the
>aluminuim head which means things won't line up right.
>
>Karl Series V
Not only are the ports differents, but port positions, cam, intake and
exhaust are all specifically made for the cast head.
If you have ideas of doing this, remember you MUST have all the above
from
the donor Hillman.
Also it is my understanding that only 1bbl carbs (CD150, 32 zenith or 32
Solex) are used on these inlet manifolds, and these carbs are difficult
to find in the states.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:37:10 CDT