In a message dated 97-03-28 10:12:52 EST, sunbeam(at)tir.com (Jeff Antosiak)
writes:
>> Personally I have had good luck with renting quality hub pullers, but
>> wimpy ones,
>> or ones not specifically set up for 4 on 4 1/4 inch hubs should not be
>> used.
>> Universal hub pullers seldom work, and are easily broken by the amount
>> of force required to unseat the hub from the axles.
>>
Universal hub pullers also often cannot be used because of interference with
the axle nut.
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:37:13 CDT