When I was painting with lacquer, I NEVER sanded the final coat,
but did to each of those beneath it. The unsanded luster of lacquer is
perfect! when the prep is done right. IMO
Rich
> ----------
> From: Scot Harig[SMTP:sharig(at)ibm.net]
> Reply To: Scot Harig
> Sent: Friday, July 11, 1997 4:37 AM
> To: 'Schotland'
> Cc: 'Alpine News Group'
> Subject: RE: Lacquer Sanding Tips Needed
>
> Gary,
>
> I usually start with 400 then 600 but I never wet sand. Their are a
> coupple schools of thought on how the moisture can penatrate the paint
> during sanding and create a rust problem later. Anyhow after the 600
> you should be able to rub out with a rubbing compound. Not necessary
> but for a higher gloss then you go to a Jewlers Rouge which is finer
> than standard rubbing compound. Well this is how I usually do it
> anyhow. Good Luck!
>
> Scot
>
> ----------
> From: Schotland[SMTP:schotbus(at)cyberenet.net]
> Sent: Sunday, August 10, 1997 8:26 PM
> To: tigers(at)autox.team.net; alpines(at)autox.team.net
> Subject: Lacquer Sanding Tips Needed
>
> A friend repaired a little dent in my Alpine's rear fender last
> weekend
> and repainted it with lacquer because he said was very easy to work
> with. If the car were anything more than a somewhat shabby driver, I
> would have gone with a more durable paint. Now the ball's in my court
> as
> far as sanding the dull initial finish to point where it looks
> presentable.
>
> My friend said I should wet sand with 1200 grit. After lots of elbow
> grease, a small section is getting fairly smooth, but it's not nearly
> as
> shiny as I'd like it. Rather than spending an entire weekend
> knocking myself out on one fender, I thought it would be wise to seek
> advise from someone who's experienced with lacquer. My questions are:
>
> Should I start wet sanding with a coarser paper and then move to the
> 1200? If so, what grit do you suggest?
>
> After the 1200 grit, what is the next step to get that showroom
> shine? Should I continue wet sanding with a finer grit paper or
> should I change to some sort of super fine grit polishing compound?
> Product recommendations would be most welcome.
>
> Thanks for your assistance.
>
> Gary
>
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:47:26 CDT