On Sun, 3 Aug 1997 14:12:23 -0700 Christopher.Albers(at)bubbs.biola.edu
(Christopher Albers) writes:
>Jarrid,
> I know that no seal will just "drop in." But won't machining off
>the
>flange eliminate the few thou clearance and make it more like 1/4"?
Well, sort of, but if you cut the HB too deep, it will be prone to
breakage.
I suspect, you cant get ther from here. You'd have to cut an 1/8th of an
inch
off the HB to get your 1/4 inch. Frankly, there just isnt enough meat on
the OD
of the HB to do it safely.
>Or, if that isn't enough wouldn't it be possible to just cut out the
>whole stock flange and braze in a wider flange to accomodate a press
>fit seal?
This is exactly what I described originally. I know this will work.
> Well, this speculation may all be moot after Armand's offer
>for plans on a fix. I'm looking forward to seeing how someone has
>already done it.
Do tell,
Did I miss something?
Armand?
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:49:36 CDT