From: T Wiencek
>Thanks to everyone for all their help but now I have another question.
Are
>all the bell housings interchangable and have the same dimensions? Tom
Yes, all are identical, if not the same exact part number.
The only problems could be the later Rapier transmisions, which
I have read to be longer in some respect or another relative to the
Series Alpine bits.
BTW, I ran a 1592 in my SII with an early SV all-sync trans and the
early
flywheel with the big clutch.
The only this special was to remove the TO, fork and pedastal from my
non-sync trans and put it in the all-sync bell-housing.
Worked very well till the 1725 came in, and I had to reverse all the
above.
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 09:50:13 CDT