>Jarrid
> What about plugging a PCV into the port at the bottom of the log
>manifold that is suppose to have the burp valve. I plugged this port
>years ago because I was tired of having gas dumping onto my exhaust
>manifold. The only drawback that I can see to using this port for the
PCV,
>is that gas might collect in the tubing if the tubing is routed under
the
>motor rather than over the top. Whether this gas collection would ever
>cause a problem, since it only occurs when you shut off the motor, I
don't
>know.
>
>Bill Lewis
>Series II
You could do this, but you will probably have problems with heat
on the rubber hose goin in.
Also this port is pretty small in diameter, so flow may be a tad
restricted.
Oil may accumulate there since it will have to flow upwards,
but I am not so certain this will be a major issue if you use
the SV oil trap, and the engine is somewhat fresh.
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:03:48 CDT