From: Jay Laifman
>You are certainly correct about interfering with the carbs. I put dual
>Webers on mine, and could no longer use the stock
>MC, and had to go to a shorter one - which actually had the reservoir
>attached!
>
>Jay
On my dual weber setup, I removed the spacer, and had only to
shave about .075 off the end "frontward" of the master cyl to gain
excelent clearance to the carbs.
I also had to relocate the reservoir, and used a SV plastic one
that mounts higher than the SII.
I am currently using Mikunis, so this may not be the case
with defacto webers.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:03:54 CDT