Steve Semeraro wrote:
>
> I have never had a brake booster in my car, and I'm trying to figure out
> how the one I've just purchased should be installed. When I face toward
> the car from the front there are three threaded holes in the wheel well
> facing roughly forward and a small bracket on the left. I know that
> there is another bracket that, I guess, bolts into the holes and somehow
> connects to the booster? Gary Schotland has a bracket that he's agreed
> to sell me. Maybe the installation would be obvious after I saw the
> bracket. But I'm trying to determine what else I might need to complete
> the installation so that I can get all the bits at once. Would someone
> be willing to explain how it all fits together, or better still send me
> a diagram? Thanks in advance.
>
> Steve Semeraro
> Series V Alpine
> 1968 Marcos GT
Steve:
I had more time to look at the parts manual and booster and the brackets
you need are shown in plate A, section YX -#10 and #61
Also, my booster which came off a 66 Series V, was fastened to the #10
(front) bracket with a band that goes around the whole servo for this
purpose.Hope that you have finally gotten your manual!
Ron Tebo
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:05:21 CDT