----------
From: Bob Douglas
>My '62 S.II tank was originally black all around.
>
>BTW - were the bolts that hold the tank to the mounting ring (S.I/II)
installed
>heads up or down?
The heads MUST face down.
This since the mounting nuts are captured in welded on sheetmetal.
If you mounted them the other way, you'd also have to have used
nuts on the bottom side, and you wouldnt have been able to tighten the
bolts because the sheet metal shield would crunch down before the
head was tight to the nut.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:07:02 CDT