Don,
I know that when dad took the doors off the Tiger he used an impact
screwdriver.
The hinge plates bolted to the car can be backed out with the doors in
place. You simply place the driver in the screw and tap the end with a
hammer. The screw magically begins to back out. I was never able to get
them out of my Minx with a conventional screwdriver.
You remove the screws from the hinge plates on the doors after you get the
doors off the car.
One of the web pages has the chart for looking up paint numbers and getting
manufacturers codes. I don't know which one it was sorry.
Hope I was some help.
AJR
>I am attempting to complete body work and get ready for painting my 67
>Alpine.I have not tried to remove the doors before because it did not
>seem necessary,but now I think it will be much easier to prep the car
>for paint with them removed.Anyone have experiences good or bad about
>this and any tips on the easiest way to rmove doors.Some of the screws
>holding the hinge on are very hard to get to...Thanks
>
>I almost forgot does anyone have any good ideas on matching original
>colors with paint types available today particularly white....
>
>
>Don Hill
>67 Alpine series V
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:10:12 CDT