SoftTop Frame

Karl Gilchrist (xtr25618701(at)xtra.co.nz)
Wed, 05 Aug 1998 20:27:33 +1200

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Bob Hamilton: "Re: Back from England"
Previous message: Jerome Yuzyk: "Re: Jobs to do while gearbox is out"
Next in thread: Kevin Meek: "Re: SoftTop Frame"
Reply: Kevin Meek: "Re: SoftTop Frame"
Maybe reply: RobCarpent(at)aol.com: "Re: SoftTop Frame"
Maybe reply: Rootes(at)aol.com: "Re: SoftTop Frame"

Has any one had problems with their softtop frame not meeting the rear vertical window edge. With the top up on my Series V I have a triangular hole behind the window glass-this is about 1.5cm at the door level tapering to nothing at the top rear corner of the glass. The horizontal seal along the top is a perfect snug fit. I suspect the frame has become distorted over the years but I am at loss how to correct it The top is new and so are all the seals. Any ideas?

Karl

Next message: Bob Hamilton: "Re: Back from England"
Previous message: Jerome Yuzyk: "Re: Jobs to do while gearbox is out"
Next in thread: Kevin Meek: "Re: SoftTop Frame"
Reply: Kevin Meek: "Re: SoftTop Frame"
Maybe reply: RobCarpent(at)aol.com: "Re: SoftTop Frame"
Maybe reply: Rootes(at)aol.com: "Re: SoftTop Frame"