>
>1. How far forward from the wiring harness clamp centered over the =
>wheel well arch should the junction between the main harness and the =
>head-lamp sub-harness be?
>
Mine are about 3 inches... just where they want to lay with no
stretching.
>2. Are the head-lamp sub-harness wires supposed to have a sleeve over
>=
>the wires or do the individual wires show?
>
No sleeve, they show.
>3. Are both the head-lamp and turn-signal grounds connected at the
>clip =
>under the hood bump stop?
The turn-signals don't have a ground, that's why you have to jiggle the screws periodically.. At least on early Mk1s.
>
>I seem to remember that the harness goes behind the voltage regulator
>=
>bracket on the drivers (US) side, is this correct?
Yes.
Gary