They are extremely thin sleeves that are made in tousandths of an inch increments on the diameter and made to be pressed onto a shaft where there there is damage or a groove from an oil seal rubbing on it. They come in all sizes and each size fits a certain range of diameter shafts. They come with their own application tool - one time use.
Regards, Bob
At 01:19 PM 8/29/1998 EDT, you wrote:
>In a message dated 98-08-29 12:58:54 EDT, dbilesky(at)cln.etc.bc.ca writes:
>
>>Any problems using SPEDI-SLEEVE for the pulley / timing-chain-cover leak?
>>
>>dgb
>
>
>Never heard of it. Tell us more.
>
>Dick Sanders
>
>
>
=========================================================
Robert (Bob) A.C. Hamilton, Waverley, Nova Scotia, Canada
The Man of Many Sunbeams - Alpine, Drophead and Saloon 1953-1954
Home Page: http://www.navnet.net/~hamilton/index.html - REVISED!!!
E-Mail: hamilton(at)navnet.net
=========================================================