On Mon, 4 Jan 1999, T.J. Higgins wrote:
> Allan K Hansen writes:
> >
> > Can anybody tell me which jets should be fitted in Zenith 36 WIP 3
> > carburettors when these are fitted on 1725 cc engine.
I am running this set up, and using a color tune I found that the stock
jets with the larger choke tubes (they are 2 mm larger) got the color
about right. I think it still tends to run a little choked at higher
rpms, and I have thought about trying to bore out a set of choke tubes so
that I could then but in a larger set of jets.
Bill Lewis
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:26:49 CDT