>
>Question #2.
>I have tried ever thing I can think of to get my soft top to fit into
>the compartment and fold up the three covers. NO WAY. I cant even get
>it all the way down into the designated place. It seems to be to small
>and I can get only one side over the brakets and into the compartment.
>What am I doing wrong, or is my soft top not mounted properly (by the
>DPO) It doesnt seem overly tight when up but there is no way I can get
>it down. I have considered removing it and just running with and with
>my nice hard top.
>Help.
>
>Thanks in advance for all the good advice I'm going to get.
>Rob
>
>
Rob,
It sounds like you may have the wrong soft-top installed. There should be 2
zippers along the back bottom edge of the soft-top. You unzip the zippers,
fold the sides over the main part of the top and the whole thing should
stuff in behind the middle panel.
Scott Rohr
Series I
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:35:13 CDT