Yes this is correct. There are two wires on the A terminal. The main
wire to the solenoid is Ok. The other brown wire is fried. I am
positive that this wire is same wire that is under the dash, because my
ohm meter shows zero resistance. Wheather or not that wire is
connected, I am getting week power the ignition switch.
At ignition switch, I am getting 12 volts on brown wire with key off.
2.8 volts with key on.
When I ran a test wire from under the dash where the brown wire
connected, to the terminal on the control box, there was no change in
anything.
I'm really confused now.
Rob
Tom Hill wrote:
> Rob,
>
> So what you are saying is that TWO wires attach to terminal A on the
> control box. Also, your control box has 5 terminals, right?
>
> Tom
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:35:52 CDT