Scott,
I just pulled my rear hubs. It was rather easy, but I got lucky. If you remove the
wheel and unbolt and remove the brake drum. Note that the bolt holes in the hub for
the drum are very similar to the ones on a car with steel disk wheels. So you can use
any hub puller. I rented a big hub puller that normaly bolts on with the lug nuts.
It also has a big hammer type of arm on the center bolt, but a air wrench works great.
Cole
> One more question re: rear hub removal. The archives mention using a drilled
> out splinned hub knock off to make a hub puller. A nut is placed on the
> inside of the knock off and a sharpened bolt through the knock off and nut
> from the outside. Won't this inside nut spin as the bolt is threaded in
> against the axle?
> Am I missing something here?
> Thanks.
> Scott Donnelly
> SV
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:40:33 CDT