Am just starting the process of re-installing stuff into my freshly
painted body shell. Despite all the notes I made when stripping stuff
out, I find there are still things that are not clear now.
Have reinstalled the gas line, and have all the clips identified from
the rear up to where the pipe emerges from the transmission tunnel and
goes forward along the right side frame. What is the correct path for
the gas line in the engine compartment? After the three double (brake
line and gas) clips on the frame, does it pass between the front end of
the steering relay lever (drop arm) and the frame, or should it just
pass straight into the space.
Thanks
John Slade
B9401380
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:40:38 CDT